Old Style 11 Hole Strat - Dark Blue Mirror abr1

Old Style 11 Hole Strat - Dark Blue Mirror abr1This pickguard will only fit Fender Stratocasters with the mounting hole pattern known as the 11 hole transition or old style 11 hole mounting pattern that was used by Fender in late '59 up to '62. Please note the variation from the modern 11 hole or current production is the location of the mounting hole on the top edge between the neck and middle pickup. This hole was moved almost directly over the middle pickup in 1963. Please see ST 200 template

Set of 6 buffalo bone bridge pins for acoustic guitar

String Thru Hole Ctr Height= 7/8 in

Peghole size required= 25/64 in

Four layer aged white pearl/white/black/white material with a clear protective removable masked top

String Post Diameter = 6mm

It is not advised to use any "stops"

This enables you to solder your wiring and install without the possibility of twisting the soldering connections enabling a fast and easy installation or repair

Korean-made EdgePro-II Double Locking Tremolo (as used on the early Ibanez RGT6EX models) that uses two set screws to allow arm height and torque

Fits most vintage and modern Precision Bass and Jazz Bass guitars with a five-screw mounting design

Replacement lower control plate for Fender Jaguar

20 medium jumbo frets

String Post Diameter= 1/4 in